Download Automotive Brochure here
NEWS: Sensoric Solutions : OMS 7 Optical Sensor
The sensor combines non-contact optical sensor technology with intertial measurement technology and provides the user with a wide range of precise measured values for applications in vehicle testing.
Major features:
- Speed range 400km/h
- High accuracy : 0,2% speed and 0.1' angle
- Speed in 3 axis
- Yaw rate in 3 axis
- Acceleration in 3 axis
- 1kHz sampling rate
- Recalculation to POI
- Data stream via Ethernet / CAN
Please contact our LEANE Team for questions and all your #AUTOMOTIVE requests.
Suchy Data Systems presents the all new XProlog 25hz.
It logs on a 32Gb Memory card all your testing data coming from CANBus and GPS. With an optional piggyback analog board you can monitor up to 4 analog channels with +/-20v.
Suchy XproLog is stacked with a 6 axis IMU , with Gyros and Accelerometers.
Automotive Power Supply 10...32VDC
NEWS: AB DYNAMICs CORPORATE PRESENTATION
We would love to discuss how AB Dynamics can support your vehicle development programme.
Vehicle ADAS Test Platforms, Soft Targets, Ground Traffic Control Software (GTC), Robot Controller Software, Driving Robots, Driveless Test Systems, Kinematics & Compliance Measurement, Dynamic Driving Simulator, Static Driving Simulator.
Become our customer , we are customer oriented , ready to fullfill all your testing needs.
Please contact our LEANE Team for questions and all your #AUTOMOTIVE requests.
NEWS: DEWESOFT ORDER TRACKING FOR ELECTRIC POWERTRAIN
NEWS: DEWESOFT X 2021.6 - Dewesoft ALL new Data Acquisition Software
The all new 2021.6 Dewesoft X is out. Your best companion for data recording and data analysis wears an all new dress.
The changes are not only limited on the improved user experience, but software is been rewritten for optimization and for added functionality.
One stop solutions for electric motor and inverter testing, battery and battery charge testing, combustion analysis, NVH.
New Orbit Analysis for precise rotor movement measurements.
Historian Database allows to monitor long-term applications.
Please contact our LEANE Team for questions and all your #AUTOMOTIVE requests.
NEWS: LEANE AUTOMOTIVE DIVISION NEW CATALOGUE
NEWS: DEWESOFT NEXT GENERATION POWER ANALYZER WITH SIRIUS XHS
Electric and Hybrid cars are reaching the mass market with longer ranges and more reasonable pricing.To Evaluate power consumption of such vehicles tests are needed.
To measure power Consumption, measurements of voltage and current must be performed safely and with no influence of the car impedance.
The new SIRIUS XHS data acquisition system from Dewesoft is the first DAQ device with Hybrid ADC technology that makes possible to measure power during real drive tests accurately, and with no influence of the cable shield.
Advanced and easy to use solutions for complete electric and Hybrid vehicle testing in the development, validation and production phase.
One stop solutions for electric motor and inverter testing, battery and battery charge testing, combustion analysis The all new
DEWEsoft SIRIUS XHS with the new Hybrid ADC Technology is capable of high-bandwidth transient recording and very high Dynamic.
Made for your very demanding application such as Vehicle Power Analysis, Combustion Analysis, E-Mobility, Power Quality Analyzer where the highest precision is an absolute necessity.
The power analysis module allows measuring every kind of motor (1-12 phase) and inverter (DC-AC, AC-AC, switching frequencies up to some 100kHz).
Modular DAQ system allows measuring the power (AC or DC) at multiple points perfectly synchronized.
Please contact our LEANE Team for questions and all your #AUTOMOTIVE requests.
SUCCESS STORY: AB DYNAMICS and LEANE INTERNATIONAL SECURE EUROPEAN COMMISSION CONTRACT :
JRC Chooses ABD as supplier of equipment for motor vehicle safety compliance and experimental testing.
dQdt provides high accuracy flow meters (sensor or complete solutions) for measuring fluid consumption.
Watch the video of the test bench for fluid leakage.
Key features are: 1 value per second, measuring to atmosphere, hydraulic oils and fluids, high accuracy and dynamics, traceable calibration
NEWS: AB DYnamics Swarm testing in simulation and on the track
This video demonstrates the unique capabilities that AB Dynamics can offer. We can recreate complex real-world scenarios featuring multiple moving actors with centimetre precision on the test track, and deliver the identical tests within simulation. This allows vehicles to be tested in conditions that represent real traffic events, and enables validation of simulation results.
We've used a number of edge-case traffic scenarios, with all of the vehicles shown in the video being controlled using our driving robots, plus the addition of our GST and LaunchPad ADAS platforms.
ADAS and AV developers will recognise the vital safety benefit of exposing their vehicles to these scenarios in controlled conditions before they are encountered on the public roads.
NEWS: DEWESOFT SIRIUS R2DB THE PERFECT SOLUTION FOR VEHICLE DYNAMICS and HANDLing
NEWS: AB DYnamics announces new steering robot modEl HALO
AB Dynamics all new Halo joins the family of the Torus model with hollow-center installation that allows testers and engineers to leave the airbag in place.
For all your italian application, ADAS and vehicle testing and dynamics don't esitate to contact our LEANE AUTOMOTIVE team.
Halo Specifications include:
Peak Torque | 90Nm |
Peak rotational speed (at up to 20 Nm) | 2500'/s |
Moment of inertia | 0.1156kg m^2 |
Motor height | 78mm |
Driving simulators are becoming more and more necessary during testing and developing on new car strategies and configurations.
F1 Teams are forced by F1 regulations to test cars only for limited time.
Integration of realistic indoor simulators like our AB Dynamics aVDS is been choosen by Alfa Romeo F1 team as their precious help during R&D of new components, and new tracks simulations.
Watch aVDS on action.
NEWS: DEWESOFT E-MOBILITY - EDRIVE and electric vehicle testing
Advanced and easy to use solutions for complete electric and Hybryd vehicle testing in the development, validation and production phase.
One stop solutions for electric motor and inverter testing, battery and battery charge testing, combustion analysis The all new DEWEsoft SIRIUS XHS with the new Hybrid ADC Technology is capable of high-bandwidth transient recording and very high Dynamic.
Made for your very demanding application such as Vehicle Power Analysis, Combustion Analysis, E-Mobility, Power Quality Analyzer where the highest precision is an absolute necessity.
The power analysis module allows measuring every kind of motor (1-12 phase) and inverter (DC-AC, AC-AC, switching frequencies up to some 100kHz).
Modular DAQ system allows measuring the power (AC or DC) at multiple points perfectly synchronized.
Please contact our LEANE Team for questions and all your #AUTOMOTIVE requests.
NEWS: DEWEsoft COMPLETE COMBUSTION ANALYSIS SOLUTION
SUCCESS STORY: AB DYNAMICS and VW GROUP with LEANE AUTOMOTIVE TEAM HELP TO PERFORM ADAS Scenarios in ITALIAN NTC Proving ground
NEWS: AB DYnamics new STATIC & DYNAMIC DRIVING SIMULATOR
Our high quality driving simulators (static and Dynamic) enable meaningful testing to be undertaken early in the vehicle development process.
The consistent Simpia toolchain allows for the transition from virtual testing to track testing to occur seamlessly whilst precisely correlating resuts.
AB Dynamics is one of the few companies with the technology that enables customers to progress from virtual laboratory based evaluation to real world track testing in a single digital environment.
NEWS: AB DYNAMICS NEW LAUNCHPAD 60km/h
A new success story for AB Dynamics as ZALAZONE a state-of-the-art test facility located in Zalaegerszeg Hungary has selected their equipment and driving robots as exclusive supplier for automotive testing in their proving ground.
AB Dynamics is one of the few companies with the technology that enables customers to progress from virtual laboratory based evaluation to real world track testing in a single digital environment.
The Test facility selected SR60 Orbit steering robots with CBAR combined brake and accelerator robot so that vehicles can be controlled to drive accurately and repeatedly to create desired scenarios. ADAS targets that include guided Soft Target (GST), Soft Pedestrian Target (SPT) and LaunchPad platforms were also included in the purchase. To complete the package the FLEX-O-DRIVE-BY-WYRE control system was selected as a cost and time effective solution to control cars to be used as background traffic with complete GPS sync with all other driveless cars in the more complex ADAS scenario.
WELL DONE!!!!!!!
MoshonData is launching a new unique 300ft (91m) long tunnel for testing ADAS sensors in the dark. Exclusively available from MoshonData , the night vision tunnel provides interior light blocking to assist with the development of night vision assist technology.
The tunnel comes in six 50' long connecting sections, five emergency exits lights every 50' and three 5000 CFM exhaust fans to clear the air after every run through.
MOSHON DATA releases the first AEB validation tool designed for end-of-line vehicle production facilities.
This bundle include also a complete ISO standard foam vehicle target (MD-VT-F), data logger with INS and differential RTK that gives 2cm position accuracy. Relative distance , longitudinal range and lateral deviation are also recorded. A smart small display with all parameter is also included and can be installed on the windshield with a suction cup.
Data logging of all vehicle intertial and sensor data at 200Hz to SD Card.
MOSHON DATA just released an all new set of pedestrian targets for ADAS testing.
The Standard Euro NCAP pedestrian target fulfill all new requirement for all you test needs.
This include PT dimensions for both Adult and Child, low reflective skin surface, clothing and hair , and even skin color.
For more details download the full brochure clicking the link below.
APPLICATION: IN SELLA MOTORBIKE TESTING WITH THE ALL NEW SUCHY DUAL ANTENNA/DUAL GLONASS XPROGPS MAX 100 HZ
As space under the car hood is always limited , engineers are always facing new challenges to get the job done, and respect the schedule of the car R&D.
Hundreds of sensors are involved during testing and reducing the time of installation is a key feature to reduce development costs.
Small form factor of the acquisition systems and neat installation it's a must.
Follow the link below to read the full article of this amazing Dewesoft Krypton application.
The smartMINI is a compact datalogger with 2 CANbus input that records data on a SD Card.
It can be highly customised with GPS, Input/Output Analog and Digital Channels, it is the perfect device for fleet management and can be ordered in rugged version for harsh and very demanding environment like the Rail market , Avionics.
Data can be sent over the Cloud and be collected easily sitting on your desk.
dQdt provides high accuracy flow meters (sensor or complete solutions) for measuring fluid consumption.
The DQDT Urea Measurement unit is perfect for test bench or on the road real measurement.
With the always more restricting emission levels , testing the correct injection of AdBlue is becoming more and more important.
More than 100 invited guests , politicians ,business men and scientists gathered in the laboratory halls of the Adrive Living Lab of Kempten University for the roll-out of the new advanced Vehicle Driving Simulator (AB Dynamics aVDS).
Enjoy the video of the test carried out during the presentation by the official AUDI SPORT ABT Formula E Team driver, Mr. Daniel Abt.
Suchy Data Systems presents the all new GPS/GLONASS IMU aided XProGPS_nano Speed Sensor.
Integrated IMU with 6-Axis intertial sensors.
Barometric Altimeter of latest generation.
Programmable Analogue Output - directly reads speed
CANbus/USB/COM output format.
AB DYNAMICS EURO NCAP 2020 TESTING
ADAS Testing typically involves creating complex scenarios with multiple vehicles (or soft targets) to see whether the vehicle's own systems detect an imminent crash. Using AB Dynamics' robots and targets enables these test scenarios to be programmed and run quickly and accurately, giving high repeatability and consistent data.
AB Dynamics' robots and controllable soft targets have been adopted worldwide as the first choise for ADAS testing.
MOSHON DATA just released the complete 3D Moshon Village which has all the elements you would expect to see down your everyday street.
This is perfect for testing in an empty space such as testing track or proving ground.
Buildings, pavements, streetlights, pedestrians, vehicles, animals and even road signs to create the perfect ADAS real life scenario.
Data Acquisition and real-time control front-end system for industrial applications.
All-in-one solution for real-time control and feedback monitoring. Dual EtherCAT , great signal conditioning up to 20kHz , redundant power supply, multiple chassis option, wonderful price/performance ratio and as usual Dewesoft X3 software included with free lifetime upgrades
Next generation software and hardware solution for monitoring, commanding and coordinating proving ground vehicle testing.
GTC is a comprehensive package for all vehicle traffic at a proving ground including : Robot-controlled vehicles, ADAS platforms, human driven vehicles and fixed proving ground infrastructure.
Alfa Romeo Racing announces AB Dynamics as official Supplier of the advanced Vehicle Driving Simulator (aVDS). Alfa Romeo Racing will use the aVDS driver-in-the-loop simulator to accelerate vehicle performance development and work with AB Dynamics to extend and further develop simulation products for motorsports applications.
Watch this amazing video where a smart car with proprietary hardware and software developed by Danisi / Meccanica 42 is able to avoid a Moshon Data MD-S target changing line .
AB DYNAMICS FLEX-0 DRIVE-BY-WIRE CONTROLLED VEHICLE
AB DYNAMICS NEW TRACK-FI System
These courses offer an opportunity to acquire from the fundamentals to the most advanced tecnique for vehicle dynamic testing and Data Analysis.
Our professional team will give you an insight in the main theoretical and practical aspects of the testing procedures and Postprocessing.
BASIC (1 Day)
INTERMEDIATE (2 Days)
ADVANCED (3 Days)